Altec Lansing Industrial Professional Sound Products Spec site

ALTEC LANSING INDUSTRIAL PROFESSIONAL SOUND PRODUCTS POWERED MIXER LIST

Altec Powered Mixers

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

1783 Line Output Module

page 2

 

<< Previous

The mixer also contains two auxiliary input channels for high-impedance line or tape sources. These channels have independent monitor sends, pan pots, and slide faders.

ARCHITECT'S AND ENGINEER'S SPECIFICATIONS


The line output module shall have a low source impedence, continuous variable gain, and the capability for adding a 1786 output isolation transformer. In addition, the module shall be fully compatible with the 1700-series mixer/preamplifier and mixer/power amplifier mainframes, and accept any one of the 1790series input connectors.

The line output module shall meet the following performance criteria. Gain: 26 dB, continuously variable. Frequency response: 50 Hz to 20 kHz, ±1 dB. Output source impedance: <5052. Noise floor: <-80 dBm. Total Harmonic Disrtortion (THD): <.05%, (<.1% with 1786), Ref. 1 kHz, +8 dBm output, 30 kHz low pass filter.

The line output module shall be the ALTEC LANSING Model 1783.


 

Next >>

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

aLTEC aMPLIFIER aCCESSORIES SECTION Altec Amplifier Section Altec Microphone section  
Altec Powered Mixers and Misc
Altec Signal Processing sections
 
Specifications Catalog Table of Contents

 

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION