ARCHITECT'S and ENGINEER'S SPECIFICATION
Microphone inputs:
Type: Low impedance, electron
ically balanced, pin 2
reference positive
Maximum level: +6 dBu (1.55 Vrms) Impedance (@ 1 kHz. 4400 0
CMRR: 55 dB minimum
75 dB typical
Line inputs:
Type: High impedance, electron
ically balanced tip refer
ence positive
Maximum level: +24 dBu (12.3 Vrms)
Impedance: 60 kfl
Input channel equalization:
High frequency: ± 15 dB shelf @ 10 kHz
Mid frequency: ± 15 dB peak/dip sweeping
from 350-5000 Hz
Low frequency: ± 15 dB shelf @ 100 Hz
Peak indicator threshold:
Input channel: +16 dB
(4 dB before clipping) VU meter: +14 dB
(10 dB before clipping)
Headphone output:
Power output: 20 mW into 8 S2 Frequency response: 50-15 kHz at ±2 dB
Phantom power: 48 Vdc at pins 2 and 3 on mic connector, 6.8 kS2 source impedance
PFL (pre-fader listen): Switchable for input and output channels
AUX 2 send
(input channels): Switchable pre- or postfader
VU meter calibration: 0 W=+4 dBu (1.23 V)
Lamp accessory: 12 Vac, 375 mA maximum, w/BNC Connector (Littlelite 18 G-Hi or equivalent)
Power requirements: 115 or 230 Vac 50/60 Hz, 40
watts Rack Mounted Dimensions:
Height of mounting face: 17.5 inches (445 mm),
10 Rack Units.
Width of mounting face: 19 inches (483 mm)
Width of chassis: 17.2 inches (437 mm) Maximum Depth
behind mounting surface: 6 inches (152 mm)
Table Top Dimensions:
Width of console (face): 19 inches (483 mm)
Height of console at front: 2.17 inches (55 mm) Overall Height
at rear of console: 6.5 inches (165 mm)
Overall Depth of console: 18.25 inches (464 mm)
Weight: 27 lbs. (12.2 kg)
LINE LEVEL INPUTS OUTPUTS
MAXIMUM INPUT MAXIMUM MINIMUM INTERNAL
LEVEL IMPEDANCE LEVEL LOAD IMPEDANCE
Left & Right Insert +20 dBu 10 kS2 Main +24 dBu 600 9 759 (balanced)
Left & Right Tape Monitor +24 dBu 600 Q 759
Return - 5 kSa (balanced)
Left Sub +24 dBu 600 9 759 (balanced)
Aux Input 1 & 2 +20 dBu 51 kSa Right Sub +24 dBu 600 Sa 75 Q (balanced)
Monitor Input +20 dBu 75 kS3 Left & Right +20 dBu 20009 100 52 Insert
Input Channel Aux 1 & 2 Out +20 dBu 600 Q 100 Q Insert +20 dBu 5 kSa
Input Channel +20 dBu 2000 S2 1000 Insert
|
