Altec Lansing Industrial Professional Sound Products Spec site

ALTEC LANSING INDUSTRIAL PROFESSIONAL SOUND PRODUCTS AMPLIFIER ACCESSORY LIST

aLTEC aMPLIFIER aCCESSORIES SECTION

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

 

15595A High Pass Crossover/Equalizer Module

page 4

 

<< Previous

Amp Accessories 1697B Passive Monitor Panel pg2

ARCHITECT'S AND ENGINEER'S SPECIFICATIONS


The high pass filter shall be a third-order Butterworth for maximally flat response with an 18 dB/ oct stopband attenuation rate, and shall have a fixed corner frequency located on one of the standard ISO frequencies. The filter shall have an electronically balanced input, an unbalanced output, and a male octal plug, and be fully compatible, both physically and electrically, with ALTEC LANSING's Anniversary Series of power amplifier products.
The filter shall include additional circuitry and a female connector socket for the acceptance ofan optional plug-in equalizer submodule assembly. The circuitry, in combination with the submodule assembly, shall equalize specific horn/ driver combinations for a flat power response. The circuitry shall be compatible with ALTEC LANSING's 9600-series of horn/compression driver equalization submodules.
The high pass filter and horn/driver equalizer shall be the ALTEC LANSING Model 15595A-125, 15595A-315, 15595A-500, 15595A-800, or the 15595A-1250.

Next >>

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION

aLTEC aMPLIFIER aCCESSORIES SECTION Altec Microphone section Altec Mixer Section  
Altec Powered Mixers and Misc
Altec Signal Processing sections
 
Specifications Catalog Table of Contents

 

 

 

CLICK ON ANY IMAGE TO VIEW THAT EQUIPMENT SECTION